5. Fill the cartridge with toner for use in the Dell 5130.
Replace the fill hole seal (as shown). If the seal is damaged or
is leaking the seal for the Samsung CLP-300 can be used.
6. Align the two marks on the end cap and tube.
Install the end cap on the cartridge.
7. Using a small Jeweler’s type screwdriver, pry up the chip through the small slots underneath and slide it out.
Replace the chip.
DELL 5130 SERIES EASY TO REMANUFACTURE CARTRIDGE INSTRUCTIONS
© 2012 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com
www.
uninet
imaging.com
