1. Unpack the machine, check all
components and remove
the orange tape from all sides.
Then open the top lid.
3. Using the provided USB drive, install the driver.
Only connect the Printer to the PC when prompted to by the software.
4. There are three possible configurations of the iColor 550. These coincide with the ‘Print Queues’ in the iColor ProRIP (Step 13).
Quick Start Guide
for the iColor 550
5. Install the iColor ProRIP (stored on the provided drive)
2. Remove the white toner cartridge. Remove protective foam from inside
the machine and protective film from the white cartridge and reinstall.
Refer to the User Manual for selecting the appropriate driver.
Yellow
Magenta
Cyan
REAR
FRONT
White
/Clear
Spot Color
Overprinting
Black
Yellow
Magenta
Cyan
REAR
FRONT
Standard CMYK
Printing
White
/Clear
Yellow
Magenta
Cyan
REAR
FRONT
Spot Color
Underprinting
sales@icolorprint.com www.icolorprint.com
