iColor
LF700
Manual Version 3.6
Uninet
Copyright 2014
Page 47
Creating Print and Cut layers
Now that the labels are arranged and positioned cor-
rectly we are ready to move the cut data onto a new
layer, this is so that print and cut data can be sent to
ether a printer or the
LF700
Label Cutter from this
same file ensuring registration is maintained. In the fig
op-posite shows the ‘Object Manager’ with all the cut
data in the ‘Cut’ layer and all the print data in the
‘Print’ layer. To create a new layer Click on the button
in the top left corner of the ‘Object Manager’ and select
‘New Layer’.
Cut data order.
4
3
2
1
Cut Layer
Print Layer
Clicking on this button enables
you to create a new layer.
3
2
4
1
Label Cut Order
Setting the order of the cut profile is very impor-
tant for the speed and efficiency of the
LF700
. As
the cutter starts its cutting from it’s origin point in
the bottom right hand corner of the document it
makes logical sense to order the first cut outline
closest to this location. In the figure on the left you
will see the best order for cutting our example,
always working across the web before moving up
to the next row of labels then cutting in the
opposite direction. If there are more rows of labels
then in our example then continue zig zagging on
the next row and so on. Reordering the cut profiles
is done by dragging and dropping the objects in the
‘Object Manager’.
Summary of Contents for iColor LF700
Page 1: ...i C o l o r L F 7 0 0 ...