4. Drive train removed.
5. Remove the three screws that hold the developer roller
support plate in place.
6. Support plate removed.
7. Remove the two screws from the smaller developer roller
support plate shown on the opposite (contact) side.
LEXMARK C520
•
522
•
524
•
530
•
534
•
734
•
736
•
738 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
© 2010 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com
www.
uninet
imaging.com
