36. Remove the end-cap on the gear-side of the toner
cartridge by first removing two gold-colored screws as shown.
37. The end-cap should then slide out.
38. Remove all gears from the cartridge as shown.
OKIDATA B6300
•
TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
© 2010 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com
www.
uninet
imaging.com
