41. Continue with the other side until the magnetic roller is
completely removed.
42. Now you are ready to remove the doctor blade.
Remove the two gold-colored screws shown.
43. Lift the doctor blade out as shown.
44. Using a pair of needle-nose pliers, pull out the two fill plugs
located on the gearless side. Empty and clean thoroughly
using compressed air or a vacuum.
OKIDATA B6300
•
TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
© 2010 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com
www.
uninet
imaging.com
