Toner cartridge with OEM chip shown.
REMOVING THE CHIP
1. Using a small screwdriver, push in one of the tabs located
beneath the base to release the chip that is held in place.
2. The chip can now be lifted from the top or pushed out
through the tab holes beneath the chip base.
3. Chip removed with tab holes shown. It will be replaced later
with a new Smartchip.
OKIDATA B6300
•
TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
© 2010 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com
www.
uninet
imaging.com
REMANUFACTURING THE OKIDATA B6300
TONER & DRUM CARTRIDGE
By Javier Gonzalez and the Technical Staff at UniNet
