4. Remove the shutter door arm from the slot on the gear-side
of the toner cartridge as shown.
5. Using a hook tool, remove the shutter door arm located on
the gearless side. Remember the position of the spring for
re-installation.
6. Remove the shutter-door and set it aside.
7. Remove the plastic pin on one end by first drilling a hole in
the center of it. This will make it more accessible.
OKIDATA B6300
•
TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
© 2010 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com
www.
uninet
imaging.com
