23. Clean the doctor blade edge so there is no evidence of
build up along the edge. If any buildup exists, the cartridge will
streak. No chemicals should be used. We have found using a
clean ice cream type wooden stick works great for scraping the
blade clean without damaging it.
24. Install the doctor blade and two screws.
25. Clean the developer roller with a dedicated DVR cleaner
and replace into the hopper.
26. Fill the hopper with toner for use in Xerox
WorkCentre 3210. Replace the fill plug and check for leaks.
XEROX WORKCENTRE 3210
•
3220 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
© 2011 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com
www.
uninet
imaging.com
