29. Clean the contacts on the left side end cap, and replace the conductive grease.
Align the drum axle keyed end so it will fit into the keyed slot of the end cap.
Snap the end cap into place.
30. Install the three screws into the end cap.
XEROX WORKCENTRE 3210
•
3220 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
© 2011 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com
www.
uninet
imaging.com
