6. Lift up on the drum/waste hopper and remove.
If the drum axle came loose, be careful to hold the drum so it does not become damaged.
Remove the drum/waste assembly.
7. Remove the drum axle from the large gear side of the waste assembly.
Remove the drum.
XEROX WORKCENTRE 3210
•
3220 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
© 2011 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com
www.
uninet
imaging.com
