2: General Description
16
UPS471-02-00 PW9000DPA User Manual UK Dated 06/08/14
Main menu screen
Event log menu screen
DESCRIPTION
LCD-DISPLAY
1. Single Systems.
SYSTEM CONFIGURATION
SINGLE
Unit:01/1
2. Parallel System e.g. First Cabinet/Master Modules no 2 in slot 2.
SYSTEM CONFIGURATION
PARALLEL
Unit:02/2
3. Parallel System e.g. Second Cabinet/Slave Modules no 5 in slot 3.
LOAD OFF
SUPPLY FAILURE
Unit:05/3
4. Parallel System e.g. Second Cabinet/Slave Modules no 6 in slot 2.
LOAD DISCONNECTED
PARALLEL SWITCH OPEN
Unit:06/4
DESCRIPTION
LCD-DISPLAY
1. A log of the last 64 events is stored in the Power Management Display.
EVENT LOG
MEASUREMENTS
2. Allows monitoring of voltages, power, frequencies, currents, autonomy etc.
MEASUREMENTS
COMMANDS
3. Enables the commands “Load to inverter”, “Load to bypass” and battery test to be
executed.
COMMANDS
SET-UP DATA
4. Allows the UPS personalized information (such as serial number) to be entered.
SET-UP DATA
SET-UP USER
5. Allows user to set up Date/Time, automatic battery test, etc.
SET-UP USER
SET-UP SERVICE
6. Password-protected area for service engineer use only.
SET-UP SERVICE
DESCRIPTION
LCD-DISPLAY
1. Logging Control; a log of the last 64 events is stored in the Power Management Display.
01 05-10-08
14-38-56
LOAD TO INV.
2. Every stored event is identified with a sequential number and time stamp.
02 05-10-08
14-38-59
LOAD TO BYP.
3. By pressing
ENTER
the code of the event will be displayed.
03 05-10-08 14-39-14
LOAD OFF