Union RTT-1001N, User Manual

EN - 12

3 

USING THE APPLIANCE

3.1 Thermostat Setting

The thermostat automatically regulates the 

temperature inside the cooler and freezer 

compartments. Refrigerator temperatures 

can be obtained by rotating the knob 

to higher numbers; 1 to 3, 1 to 5 or SF 

(Maximum numbers on the thermostat 

depends on your product.)

Important note:

 Do not try to rotate 

the knob beyond position 1, it will stop 

your appliance from working.

Super switch 

(

In some models

)

Thermostat knob

Lamp cover

(The images are representative)

Thermostat settings:

1 – 2 :

  For short-term storage of food

3 – 4 :

  For long-term storage of food 

5  :

  Maximum cooling position. The 

appliance will work longer.If required, 

change the temperature setting.

If device has SF position:

•  Turn the knob to SF to freeze fresh 

food quickly. In this position, the freezer 

compartment will operate at lower 

temperatures. After your food freezes, 

turn the thermostat knob to its normal 

use position. If you do not change the 

SF position, your appliance work will 

automatically return to its last used 

thermostat position according to the 

time indicated in the note. Return the 

thermostat switch to the SF position 

and return it to normal use according 

to the time indicated in the note.If the 

thermostat switch is in the SF position 

when your appliance is first started, your 

appliance work will automatically return 

to the operation in the thermostat-3 

position according to the time indicated in 

the note.

3.2 Temperature Settings Warnings

•  Your appliance is designed to operate in 

the ambient temperature ranges stated 

in the standards, according to the climate 

class stated in the information label. It 

is not recommended that your fridge is 

operated in the environments which are 

outside of the stated temperature ranges. 

This will reduce the cooling efficiency of 

the appliance.

•  Temperature adjustments should be 

made according to the frequency of 

door openings, the quantity of food kept 

inside the appliance and the ambient 

temperature in the location of your 

appliance.

•  When the appliance is first switched on, 

allow it to run for 24 hours in order to 

reach operating temperature. During this 

time, do not open the door and do not 

keep a large quantity of food inside.

•  A 5 minute delay function is applied 

to prevent damage to the compressor 

of your appliance when connecting 

or disconnecting to mains, or when 

an energy breakdown occurs. Your 

appliance will begin to operate normally 

after 5 minutes.

Climate class and meaning:

T (tropical):

 This refrigerating appliance 

is intended to be used at ambient 

temperatures ranging from 16 °C to 43 °C.

ST (subtropical):

 This refrigerating 

appliance is intended to be used at ambient 

temperatures ranging from 16 °C to 38 °C.

N (temperate):

 This refrigerating appliance 

is intended to be used at ambient 

temperatures ranging from 16 °C to 32 °C.

SN (extended temperate):

 This 

refrigerating appliance is intended to be 

used at ambient temperatures ranging from 

10 °C to 32 °C.

3.3 Summer / Winter Mode

The drain tray flap allows the cold air flow 

inside your refrigerator to be adjusted 

according to a high or low ambient