APPENDIX B
-
SP2100 2D Imager Setup Barccodes, con’t
BarcodeGuy.com® - UnionNet SP2100 User’s Guide
2D
Im
ag
er
O
nly
Programming “ON”
Programming “OFF”
Figure B.0
Instructions:
To change the option, first scan the
Programming “ON”
barcode.
Then scan the Option Code. Finally scan the
Programming “OFF”
barcode.
44
B.26 - Data Matrix, con’t
Data Matrix barcodes have two formats: Square Symbols that have the same amount of elements (models / squares) within their
Data Matrix
Light Background, Dark Barcode
Data Matrix
Dark Background, Light Barcode
Data Matrix
Both Light and Dark Barcode
B.27 - MaxiCode
Set MaxiCode
Factory Defaults
Enable
MaxiCode
Disable
MaxiCode
Set MaxiCode
Max Code Length
(Default = 150)
Set MaxiCode
Min Code Length
(Default = 1)
NOTES:
* String length must be less than 65535 bytes.
* MAX LENGTH must be less than or equal to MIN LENGTH.
* If MIN LENGTH = MAXLENGTH, only that single length barcode
string will be allowed.
5.
Scan the
Save Programming
barcode, then scan the
Programming “OFF”
barcode.
A Data Matrix twin code is a combination of two Data Matrix barcodes, paired either vertically (on top) or horizontally (side by side).
They must be encoded in the same direction. They must have the same resolution with little white/quiet zones between them. There are 3
options for reading Data Matrix twin code:
●
Single Data Matrix Only
: Read either Data Matrix code.
●
Twin Data Matrix Only
: Read both Data Matrix codes. The transmission sequence is: left (upper) Data Matrix code followed by
right (lower) Data Matrix code.
●
Both Single & Twin
: Read both single and twin Data Matrix codes.
B.28 - OCR
Set OCR
Factory Defaults
Enable
OCR
Disable
OCR