WARNING
1. The too should not be used in potentially explosive
atmospheres
2. Disconnect the air hose before changing or
adjusting any sockets.
3. Before using the tool, please ensure that all
connections are secure. Loose air hoses may become
disconnected and may be caught in the revolving
spindle.
4. Prevent loose clothes, long hair etc. from coming
into contact with the revolving spindle, as this could
cause injury.
5. Excessive high air pressure that exceeds the
recommended maximum pressure may cause injuries
to the user.
6. Keep your body in well balanced position and
always wear gloves to reduce the risk of becoming
trapped due to torque between handle and work
piece.
7. Prolonged exposure to vibration can cause injury.
8. Ensure that you are aware of the direction of
rotation before starting the tool. Failure to do so may
cause injury.
9. Slip/trip/fall is a major reason of serious injury.
Beware of excess hose left on the workplace floor.
10. Wearing eye/ face protector reduce the danger
to the operator from flying objects caused by socket
failure or other reasons.
11. Wearing correct breathing protection could avoid
inhaling dust or debris from work process that can be
harmful to your health.
12. Never operate the tool away from the workplace.
It may cause the accessories to be detached from the
tool and cause injury to someone in the vicinity.
13. High sound level can cause permanent hearing
loss. Use hearing protection while operating the tool.
14. The ratchet wrench may kickback and cause
injury if the rut is too tight In this situation
use manual operation to loosen the nut before
continuing to use the power tool.
15. Unexpected tool movement due to reaction
forces or breakage of sockets or reaction bar may
cause injuries.
16. There is a risk of being injured specially when
working in confined areas if hands are not kept
away from the reaction bar. Keep hands away from
the socket.
17. In case of socket failure, there may be danger to
people from fragments being flying from the impact
wrench.
18. Be aware of whipping compressed air hose.
19. The power tool is not insulated and must be kept
away from electric power source.
Warranty:
Unior d.d. offers one year free charge service warranty to
the products supplied by Unior d.d. and authorized dealers.
All products are warranted under following conditions :
• one year from the date of purchase for tools with Unior
brand name
• the free charge service only applies to defects in material
and workmanship. The guarantee becomes invalid if the
tool has been improperly used or has been repaired using
non genuine spare parts and/or has been modified or
repaired by someone other then UNIOR d.d. authorized
service representatives
UNIOR d.d.
Kovaška cesta 10, 3214 Zreče, SLOVENIA
EU Declaration of Conformity
Hereby, we declare under our sole responsibility that the
following product
Article 1562 Pneumatic reversible
hammer
, the serial number and year of production marked
on the product, are in conformity with essential safety and
health requirements EU Machinery directive 98/37/ES fol-
lowing provisions of the harmonized standards mentioned
bellow: EN 792-6:2000 - Hand-held non-electric power
tools - Safety requirements - Part 6: Assembly power tools
for threaded fasteners EN ISO 8662-7:2000 - Hand-held
portable power tools - Measurement of vibrations at the
handle EN ISO 3746: 1997 – Acoustic – Determination of
sound power levels of noise sources using sound pressure
Zreče, December 2004
Gorazd Korošec, President
Name and signature of the authorized person
