| 17
C64.65201 Issue 3
Jun 2019
The Collis Post System requires the use of a remote viewing device which attaches
to the signal head by using the Unipart Dorman scope mount or another suitable
method. The signal is raised, the alignment checked and then lowered for
adjustment as required. It is then raised and the alignment is verified before the
signal is lowered finally to retrieve the camera and Alignment scope.
Unipart Dorman does not recommend any particular camera or App. It is the user’s
responsibility that any camera and App is used in accordance with the
manufacturer’s terms and conditions of use and instructions.
Unipart Dorman cannot accept any responsibility for the performance of third
party equipment, applications or software systems.
Users of these devices and their supporting operating systems should satisfy
themselves that their usage will not compromise the device through the introduction
of malicious software, bugs and viruses etc.
The end user is also solely responsible for ensuring any images captured and
retained do not conflict with the Information Commissioner’s Office Codes of Practice
on privacy and the use of cameras, or the General Data Protection Regulations.
When the signal is aligned correctly to the point on the signal sighting form, ensure
all the mounting nuts are correctly torque loaded and the alignment scope is
removed and stored in its protective case.
