| 7
C64.65201 Issue 3
Jun 2019
There is an adaptor bracket available that enable a suitable camera to be fitted to
the scope. The camera and mount are subject to their own separate instruction
sheets available on the Unipart Dorman website.
If the Scope lenses require any cleaning to be carried out, the only mediums
approved are water and proprietary detergents.
Do not use any solvent based or abrasive cleaning material, as this may
irreparably damage the lenses.
Ensure there is no grit etc on the lens and then using a lint free cloth moistened with
the water detergent solution, carefully wipe the lens clean before using a dry second
cloth to remove any water spotting etc and give a final buffing.
When the scope is moved from a cold to hot environment or vice versa there may
occasionally be some temporary fogging of the internal lenses which will clear when
the temperatures inside and outside the scope equalise.
Do not attempt to disassemble the scope to gain access to the internal lenses
as this will disturb the optical alignment and the scope will need to be returned to
Unipart Dorman for adjustment on the special to type jig
