49
2.6 CO/ISDN/VoIP LINE PROGRAM: Kind 3
To program the parameter, class of service, priority, restriction and ring of trunk line.
3
2
6
5
6
or setting
password
Kind 3
HOLD
0
1
CO line
No.
HOLD
2
0
Item
number
LCD
screen:
4
**PGM VER 6.XX**
Welcome ISDK SET
Item
Description
Default
Instruction
00 Usage status of CO line
0
0: In use
1: Invalid/Faulty
Application: Prevent to grab an invalid/faulty
CO line
01 Dialling type
1
0: None (When K3 item 9 is programmed to be
2, this item should be " 0 ")
1: DTMF (Related program: K1 item 8)
2: Pulse (Related program: K3 item 35-36)
02 Trunk group on daytime
0
0-9999 groups
Relate programs: K2 item 44-45, K3 item 38
Application: Enable to control outgoing call
by clustering to different group.
03 Trunk group on nighttime
0
04 Trunk ringing group on daytime
0
0-9999 groups
Related program: K2 item 33-36
Application: To cluster the ringing station
or answering station of incoming calls on
same/different group.
05 Trunk ringing group on nighttime
0
06
07
08 Change the type of installed interface
0
0: Yes, variable
1: No, Immobile
Application: Prevent to reprogram the system
by installing the different type of card (eg.
TRK-4 and SLT-4) on the original slot.
09 Connecting line type of the CO line
3
2: External amplifier (When K3 item 1 is
programmed to be " 0 ")
3: CO line (Related program: K1 item 30)
4: Door phone
6: PABX (1) (Related program: K1 item 65)
7: PABX (2) (Related program: K1 item 66)
10 Incoming directive on daytime
F168
Refer to Appendix1 to check incoming directive.
Application purpose of primary key:
0: Not use
1: Functions
2: Station
5:Physical location, please
refer to the operation code
of Appendix1.
11 Incoming directive on nighttime
F168
Application: Enter “extension number” if the user
needs to assign a specific ringing station for CO
line; Enter F128 to route built-in DSP (for ISDK
-26 Plus only)
