Technical and safety information
Models:
Unipi Neuron
PLEASE RETAIN THIS DOCUMENT FOR FUTURE REFERENCE
CAUTION
The unit can be powered only by a power source in compliance with the unit’s specifications. Using unsuitable power supply
can result in damage to the unit or connected devices. Unplug all power supplies and voltage sources before any
manipulation with the unit – danger of electrical injury or component damage!
Do not use the controller in potentially explosive atmospheres! The controller can be installed only by trained personnel with
sufficient qualification. The unit can be installed only in a suitable environment following the product’s technical specifications
(indoor space with suitable temperature and humidity, waterproof distribution boxes, etc.).
All connected peripherals should comply with all standards and regulations relevant to the country and the intended use.
Power supply (SELV)
+24 V
⎓
Ingress protection
(IEC 529)
IP20
Power consumption
Max: 12–20 W (see the unit’s
datasheet)
Working and storage
temperature
Working: 0 °C ... +55 °C
Storage: -25 °C ... +70 °C
Power supply pole
reversal protection
Yes
Installation
On a 35 mm DIN rail in a
distribution box (holder
included)
Working conditions
Compliance information
Unipi Neuron complies with the requirements of EMC,
LVD, RED and RoHS regulations relevant for European
Union states.
WEEE Directive Statement for the European Union
Unipi Neuron cannot be disposed of as household
waste. Different rules for handling electric waste may
apply in other jurisdictions.
General information
www.
unipi
.technology
Technical support, Knowledge Base
h ps://kb.
unipi
.technology
The number and position of inputs and outputs can vary for a particular unit (see
Unipi Knowledge Base
for details).
