Unipion CFR-170, User Manual

    2-1. Registration of RF Card 

Code :    (R)              (1)              (*)              RF Card 

①

 Open battery cover     

②

 Press “R” button in PCB for one second and you can hear “Bee” sound 

③

 Press “1” and “*”  button in keypad and place target RF card to near signal receiving 

part of the front body of the door lock   

※

 When the card is registered properly, you hear sound “Bee-Ri-Rick”. 

※

 When you try to register card already registered, you hear “Bee-Bee-Bee” sound and no 

registration is made. 

④

  The RF card can be registered one by one (Max. 20 cards). If you want to register 

multiple cards at one time, please place the card near signal receiving part in turn. 

※

 In multiple registration of the cards, this process will stop and power off automatically 

unless placing next card within 5 seconds. 

    2-2. Access by RF Card

Code :  (START)       RF Card 

①

 Press “START” button in the outside body (Blue LED on) 

※

 If you do not place card for 5 seconds, this mode will be stopped automatically. 

②

 Place registered card near signal receiving part   

③

 You can hear voice sound “It’s open”   

※

 Blue LED goes off and Door will be automatically locked again after 6 seconds 

※

 You hear voice message “It’s lock” when Door is automatically locked. 

※

 If the unregistered card is used, you can hear the sound “Please try again”. If the 

unauthorized access trial is made more than 3 times, all the operations of the doorlock