Page 19
P O W E R I N G T E C H N O L O G Y
Manual No. PM110-6500-00 rev-2a
PM110-6500-00-rev2a-0117.indd
4.4 Rack Mounting
The power system is designed for 19 inch rack mounting with 1” c-c mounting holes. See
Figure 4-1.
The brackets are front mounted. There needs to be sufficient clearance at the front for rectifier
installation, and at the rear for connections. When using side mains and DC connectors,
sufficient space should be allowed for access in this case.
17.28”
(438.8mm)
0.78”
(19.7mm)
[typical]
19.00”
(482.6mm)
18.38”
(466.8mm)
11.78”
(299.2mm)
12.10”
307.4mm)
12.26”
(311.4mm)
0.16”
(4.0mm)
3.48”
(88.5mm)
3.12”
(79.2mm)
2.13”
(54.2mm)
1.40”
(35.6mm)
0.42”
(10.6mm)
0.25” x 0.5” Slot
(6.35mm x 12.70mm Slot)
Figure 4-1 Dimensional Drawing (Front and Top View)
