8
EN
2.3. PERSONAL SAFETY
a)
Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
b)
The device is not designed to be handled by persons
(including children) with limited mental and sensory
functions or persons lacking relevant experience and/
or knowledge unless they are supervised by a person
responsible for their safety or they have received
instruction on how to operate the device.
c)
To prevent the device from accidentally switching on,
make sure the switch is on the OFF position before
connecting to a power source.
d)
The device is not a toy. Children must be supervised
to ensure that they do not play with the device.
2.4. SAFE DEVICE USE
a)
Do not use the device if the ON/OFF switch does not
function properly (does not switch the device on and
off). Devices which cannot be switched on and off
using the ON/OFF switch are hazardous, should not
be operated and must be repaired.
b) Disconnect the device from the power supply
before commencement of adjustment, cleaning and
maintenance. Such a preventive measure reduces the
risk of accidental activation.
c)
When not in use, store in a safe place, away from
children and people not familiar with the device who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
d)
Keep the device in perfect technical condition.
e)
Keep the device out of the reach of children.
f)
Device repair or maintenance should be carried out
by qualified persons, only using original spare parts.
This will ensure safe use.
g)
To ensure the operational integrity of the device, do
not remove factory-fitted guards and do not loosen
any screws.
h)
When transporting and handling the device between
the warehouse and the destination, observe the
occupational health and safety principles for manual
transport operations which apply in the country
where the device will be used.
i)
Do not move, adjust or rotate the device in the course
of work.
j)
Clean the device regularly to prevent stubborn grime
from accumulating.
k)
The device is not a toy. Cleaning and maintenance may
not be carried out by children without supervision by
an adult person.
l)
Food and beverages may only be stored in the device
in original packaging or in sealed containers.
m) Do not store heavy, poisonous or corrosive objects in
the device.
n) It is not allowed to store potentially explosive
substances in the appliance, e.g.: cans containing
compressed flammable gas.
o)
It is not allowed to store glass vessels with freezing
fluids in the appliance.
p) ATTENTION! Do not use any electrical appliances
inside the chamber of the appliance which serves to
store food.
q) ATTENTION! The appliance in its design contains
flammable gases serving for insulation. For this
reason at the end of its service life the appliance
should be handed over for disposal by professionals.
r)
Make sure that your hands are dry when putting your
hands into the device to prevent frost damage to the
skin.
s)
Do not leave the switched-on device in a sun-heated
vehicle or a vehicle exposed to direct sunlight.
t)
Do not immerse the device in water and do not
expose it to adverse weather conditions (rain, sun,
etc.) or to high humidity.
u)
Do not use the device upside down with the cover
facing the ground. The inclination angle with respect
to the ground should not exceed 30 °.
v)
Regularly defrost and clean the device.
w)
Do not use hard, metal or sharp tools to remove ice
from the freezing compartment.
x)
Do not carry the device by grabbing the door.
ATTENTION!
Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there is
still a slight risk of accident or injury when using the
device. Stay alert and use common sense when using
the device.
3. USE GUIDELINES
The device is designed for cooling, freezing and storing
drinks and food at a low temperature. It enables the
transport and storage of refrigerated articles in the means
of transport.
The user is liable for any damage resulting from
unintended use of the device.
3.1. DEVICE DESCRIPTION
UNI_FREEZE_32
1
7
6
2
1
3
4
5
6
UNI_FREEZE_22
1. Transport handle
2. Cover
3. Control panel
4. Cover handle
5. Emergency mode switch
6. Ventilation holes
7. Power cord socket
3.2. PREPARING FOR USE
APPLIANCE LOCATION
The temperature of environment must not be higher
than 40 °C and the relative humidity should be less than
1
7
6
2
1
3
4
5
6
