Please read the IFU carefully before fitting. Only correct usage will
warrant the function.
1. Intended Use
The knee joints are the connection between a prosthetic socket and a modular
prosthetic limb prosthesis with monocentric knee function.
2. Technical Data
•
Load-dependent brake for stance phase protection
•
Spring extender to support the extension
•
Rear-shifted axis
•
Connection proximal:
pyramid
•
Connection distal:
JT05 pyramid
JT09 34 mm tube connection
•
Max. weight:
JT05 100 kg
JT09 150 kg
•
Mobility level: 1 und 2
2.1 Service parts for JT05
2
3
Order-No.
Material
Installation height
(above the axis
center of rotation)
Weight
Flexion
angle
Article number
JT05-St
Steel
27 mm / 56 mm
530 g
170 °
4 130 010 00 22 000
JT05-Ti
Titanium
27 mm / 56 mm
355 g
170 °
4 130 010 00 33 000
JT09
Aluminum
26 mm / 117 mm
890 g
145 °
4 176 010 01 00 000
Order-No.
Description
Article number
E-JT05-01
Brake Bushing for K5
4 130 009 01 00 000
E-JT05-02
Bushing Safety Device for K5
4 130 009 02 00 000
E-JT05-03
Axis Screw for K5
4 130 009 03 00 000
E-JT05-04
Extension Stop, distal for K5
4 130 009 04 00 000
E-JT05-05
Rubber bumper
4 130 009 05 00 000
E-JT05-06
Brass washer, small, 2 pieces
4 130 009 06 00 000
E-JT05-07
Swing axis holding device
4 130 009 07 00 000
E-JT05-08
Swing axis
4 130 009 08 00 000
-
En
gl
is
h
-
2.2 Recommended attachment for JT09
A4-Ti400 Tube adapter 34 mm, length 400 mm
A30 34 mm Clampfit to 30 mm tube
3. Indication/ Contraindication
Indicationen:
•
Transfemoral amputation
Contraindicationen:
•
not known
4. Side effects
There are no known side effects.
5. General safety instructions
•
This medical device is designed for single patient, multiple use.
•
Fitting/service of this medical device is only allowed by a certificated orthopedic
professional.
•
The professional should instruct the correct use of the device to the user.
•
The joint must be protected against dust, moisture, aggressive media, and
mechanical forces so its function is not affected.
•
The joint is intended for use at temperatures from -10°C to 50°C.
Order-No.
Description
Article number
E-JT05-09
Brass washer, large, 2 pieces
4 130 009 09 00 000
E-JT05-10
Extension stop, superior
4 130 009 10 00 000
E-JT05-11
Extension assist for JT05 complete
4 130 010 00 00 001
E-JT05-16
Extension assist cable, lenght 304 mm
4 130 019 05 00 000
E-JT05-17
Centering ring
4 130 009 12 00 001
Order-No.
Material
Weight limit
Weight
Article number
A4-Ti400
Titanium
< 150 kg
435 g
4 113 050 34 33 400
Order-No.
Material
Weight limit
Weight
Article number
A30
Aluminum
< 100 kg
91 g
4 610 070 00 00 008
-
En
gl
is
h
-
