7
3.4 Momentary Switch (UP/Down Switch)
Position
No.
Functional Select (NS)
Up/Down Switch
0
Normal
N/A
1
Gain Adjustment
Move up or down to adjust gain
2
Reference Adjustment
Move up or down to adjust reference
3
Factory Page
Move up or down to recall factory page
4
User Page 1
Up: Recall; Down: Save
5
User Page 2
Up: Recall; Down: Save
6
User Page 3
Up: Recall; Down: Save
7
User Page 4
Up: Recall; Down: Save
8
Normal/2x2 binning
Up: Normal speed; Down: 2x2 binning
9
Reserved
A
Reserved
B
Reserved
C
Reserved
D
Reserved
E
Reserved
F
Reserved
Camera settings can be saved into four different user pages. Once the user page is saved and set
between shutter speeds 4 and 7, it will be activated as long as the camera is powered ON. User
Page works in both rear plate control and RS232C communication selections.
3.5 Gain Control (AGC/MGC)
Manual gain control (MGC)
MGC is standard factory setting on this
camera. The manual gain control can be
adjusted from 9 dB to 18 dB only due to the
factory default setting of AGC and AGC MAX
control. Adjusting the gain potentiometer
located on rear panel, in figure 6, will change
the gain value.
Automatic gain control (AGC):
AGC is not available and it is not
recommended to use by UNIQ.
Contact UNIQ for further details
Figure 6. AGC Control Characteristics
Figure 5. Up/Down Switch
