8 |
U n i q A i r
3.4
Positioning the device
Uniq is easy to place anywhere indoors: resting on its arc-mount (stand) on
the floor or surface, or installed on its (optional) wall mount.
To ensure the greatest effectiveness, make sure that the air flow is as
unobstructed as possible in front and on the sides of the device. If possible,
place the device so that no wall, cabinet or other furniture impedes airflow
in the vicinity of the device.
3.5
Connecting the power cord
1.
Check that the power cord is externally intact.
WARNING! Electrical safety hazard. Only use an intact power cord to
connect the device. If the cord is damaged, contact UniqAir Customer
Service.
2.
Connect the power cord to the connector on the bottom of the
device as shown on the picture below.
NOTE! Due to the type of connector, the cable can only be connected in
one way. Do not force the power cord into the connector.
1.
Plug the other end of the power cord into a grounded electrical
outlet.
NOTE! The mains voltage of the outlet must correspond to the voltage
indicated on the type plate.
WARNING! Electrical safety hazard. Only connect the appliance to a
grounded outlet.
Summary of Contents for Uniq
Page 1: ...Uniq air purifier User s manual ...
Page 24: ......