User Manual
August 2011
©Unique Perspectives
www.click2go.ie
Page 16 of 35
5.4 Recording commands on Level 2
There are two levels or pages within HouseMate. This expands the number of
possible commands to 20. Each button has a different command depending on
what level you are on. Level 1 could be used for TV commands whilst level 2
could be used for House commands such as lights, sockets, door opener etc.
Like level 1, it is possible to record a command or series of commands on each
button in level 2. In order to do so you must have level 2 open first. See page 27
on how to set the
Level Two
setting to
Open
– use Button 0
.
To record an Infra-red command on a button in level 2
1. Select the correct level by pressing Button 0. Button 1 will light up if you
have selected level 1. Button 2 will light up if you have selected level 2. In
this instance you want to select level 2.
Notice that when you release Button 0 the current level is indicated by
blinking the light in the relevant button, i.e. Button 1 or Button 2.
HouseMate stops doing this once you start using it but if no buttons are
pressed for a few seconds it will return to blinking the current level for a
few moments before it switches itself off. This gives the user a visible
queue as to what level they are on.
2. Now that you have selected level 2 the procedure for recording Infra-red
commands is exactly the same as before. Choose one of the procedures
from the previous pages.