User Manual
August 2011
©Unique Perspectives
www.click2go.ie
Page 19 of 35
In order to record a prompt for level 1 or level 2 you must connect an external
switch into switch input 1 on the right hand side of the connector panel at the
bottom of HouseMate.
1. Select the correct level by pressing Button 0. Button 1 will light up if you
have selected level 1. Button 2 will light up if you have selected level 2.
2. Select program mode and then press Button 2.
(see page 10)
3. The symbol should be flashing.
4. To record a prompt for the current level press and hold Switch 1. You will
notice that the symbol starts flashing faster and the symbol lights up.
In this mode the low battery indicator,
,
is used to indicate that recording
is in progress.
5. Continue holding and speak your prompt clearly into the microphone.
The level prompts can be a maximum of 3 seconds in duration. If you try
and record a longer prompt the recording will fail.
6. When you have finished let go the switch.
7. You can now leave program mode by pressing the
button. The
symbol should stop flashing.
8. To verify the recording press Button 0 to select the other level. Then press
Button 0 again to select the level you just recorded on. You should hear
the newly recorded level prompt.
9. Repeat the procedure for the other level.