8
OPENING AND CLOSING THE DOOR
The doors are fitted with uniform sealing strips to prevent warm air and moisture from entering the
fridge and freezer compartments.
Be sure that the doors and door seals are free from obstructions and form a complete seal around
the rim of the fridge/freezer cabinets. Over-stuffing and/or unlevel installation of the appliance will
prevent a good seal. It might be hard to open the door immediately after the door is closed. This is
due to air contraction in the fridge/freezer cabinets. This pressure difference will equalize in a few
seconds, making the doors easy to open once again.
LOADING THE FRIDGE AND FREEZER
Avoid packing food too tightly around the cooling plates located on the back wall of the fridge/
freezer. Allow air flow around these plates to ensure proper operation.
When adding unfrozen food to the freezer for the first time, fill the freezer only 1/3 full and wait
until that food is sufficiently frozen before adding more. It will also help to cool food more quickly
if the food is packaged in smaller containers rather than large ones. Food packages more than 2
inches thick will cool slowly. Avoid placing warm food in contact with cold food.
NORMAL OPERATING SOUNDS
• You may hear faint gurgling or bubbling sounds when the refrigerant is being pumped through
the refrigerant coils.
• When the compressor is on, the refrigerant is being pumped through the appliance and you will
hear a whirring or pulsing sound from the compressor.
• A thermostat controls the compressor and you may hear a ‘click’ when the thermostat cuts in
and out.
OPERATION
Summary of Contents for Classic UGP-275L AC
Page 12: ...12 ELECTRICAL DIAGRAM ...
