U G P - 1 5
29
Temperature Controls
Note: Maximum setting is override; therefore the thermostat function is not operational
at this setting. This setting is usually only required during very hot and humid days.
COOL DOWN PERIOD
To ensure safe food storage, allow the refrigerator to operate with the doors closed for at least 8
hours before loading it with food.
REFRIGERATOR CONTROL
NOTE: When first setting the controls or when changing a setting, wait 24 hours for the
temperature to stabilize before making additional changes.
TEMPERATURE ADJUSTMENT
Adjust temperature gradually: move the knob in small increments, allowing the
temperature to stabilize.
For colder interior temperatures, turn the knob clockwise.
For a warmer interior temperatures, turn the knob towards counter-clockwise
Adjusting the refrigerator control will change temperatures in both compartments.
Remember there is no fan to circulate the air in the refrigerator and freezer compartments as in
an electric fridge. For good circulation, do not block the internal cooling fins on back-wall and try
to maintain a temperature of 38
F or 4
C in the fridge
NOTE:
When first turning refrigerator on, move refrigerator controls to maximum, which is the
recommended initial setting. After 24 hours, adjust the controls as needed.
Chapter
8
Summary of Contents for UGP 15
Page 38: ...U G P 1 5 33 Parts Diagram and List Chapter 9 ...
Page 39: ...U G P 1 5 34 CO Monitor and Components 29 30 31 ...
Page 40: ...U G P 1 5 35 ...
Page 41: ...U G P 1 5 36 ...
