U N I Q U E U G P 2
1
1
Maintenance & Service
The user should be aware of service that must be done on a regular schedule to keep the
freezer operating properly. Installation must be by a licensed gas fitter in accordance with
local codes or must comply with Propane Installation Code CAN/CGA-B149.2 (latest
edition)
Keep appliance area clear and free from combustible materials, gasoline and other
liquids with flammable vapors.
Do not obstruct the flow of combustion and ventilation air, ensure clearances are
followed.
FREEZER REMOVAL
Before working on the freezer, shut off the gas supply. Disconnect the gas supply line at
the rear of the freezer. Always use a backup wrench when loosening and tightening this
connection. Disconnect freezer from 110V source.
Warning: To avoid electrical shock always unplug your freezer before cleaning.
Ignoring this may result in injury.
PERIODIC MAINTENANCE
Before working on freezer, shut off the gas supply. Disconnect the gas line at the rear of
the freezer. Always use a backup wrench when loosening and tightening this connection.
To keep your freezer operating effectively and safely, periodic inspection and cleaning of
several components is recommended once or twice a year, sometimes more often
depending on environment.
It's important to keep the area at the back of the freezer clean. Clean the coils on the
back of the freezer. Use a soft bristled brush to dust off the coils.
Note:
The following maintenance is required at least once or twice a year at least,
more often based upon usage/environment.
Chapter
3
