U N I Q U E U G P 2
5
Note: DO NOT install the appliance directly on carpeting. Carpeting must be
removed or protected by a metal or wood panel beneath the appliance, which
extends at least the full width and depth of the appliance.
Keep appliance area clear and free from combustible materials, gasoline and other
liquids with flammable vapors.
W
ARNING
–
D
O NOT USE FLAME TO CHECK FOR GAS LEAKS
Levelling
Ensure the freezer is leveled by using a 2ft level; the operation of this unit uses an
absorption system which requires the appliance to be level in order to operate
effectively.
Connecting to Gas Cylinder
The freezer is designed for a 20# steel propane self-contained fuel cylinder of not
more 4.6 gal (20lbs) capacity. The cylinder(s) must be constructed and marked in
accordance with the specifications for LP-gas cylinders of the U.S. Department of
Transportation, DOT SPEC. 39 (49CFR 178.65).
Connecting of Gas Supply
1. Use supplied regulator and hose to connect your appliance to the gas supply.
2. Hook up the 5/8”-18UNF connection to the back of your appliance using a
backup wrench.
3. Attach the regulator cap to the tank inlet connection and ensure it is tight.