Unique UGP-330L W AC, Owner'S Manual

8

OPERATION

STARTING THE FRIDGE

After the fridge has been properly connected to a power source, the compressor will automatically 
turn on and the cabinet will begin cooling.  Allow the cabinet to cool for at least 4 hours prior to 
adding food stuff.

OPERATION

Tap any key for the first time and the control panel will be activated. If there is no button selection 
for one minute, the LED display will automatically go off.

MODE

Tap the “Mode” button to select your desired operation mode. Available modes are: Quick Cool, 

Quick Freezer and Optimal.

QUICK COOL
T

he fridges temperature will be set to 2

° and will run for 12 hours. After 12 hours, this mode will au-

tomatically disable and resume normal operation. 

QUICK FREEZE 

The freezers temperature will be set to -22

° and will run for 24 hours. After 24 hours, this mode will 

automatically disable and resumre normal operation. 

Note:

 Quick cool mode does not change the 

Quick Freezer mode.

 
OPTIMAL

Tapping the “Optimal” button will adjust the fridge temperature to 2

°

 and the freezer temperature 

ito -22°

. If press any button other mode or temperature is selected the “Optimal” mode will be dis

-

abled.

/-

Tap the “/-” button to adjust the temperature of your fridge. 

Note:

 The temprature range 

for the fridge is 1

°C to 7°C. 

F/-

Tap the “F/-” button to adjust the temperature of your freezer. 

Note:

 The temprature range 

for the freezer is -14

°C to -22°C. 

When desired temperature is selected the numbers will flash 5 times to confirm. If another mode is 
selected during that period switched during the flashing period, swtich will take effect immediately.

CELCIUS & FAHRENHEIT SELECTION

Press and hold down the “/-” and the “F/

-” button to switch between celcius and 

fahrenheit.  

DOOR ALARM

Press and hold the “Mode” button for 3 seconds to disable the door alarm function. 

Note:

 the door