Light-Load
II
™
Shellplate Illuminator
Item #: T1731
Primary Features
i
Ultra-compact size is easy to carry for various applications
i
Electronic side switch for easy one-hand operation
i
High CRI (90+, Nichia), max 550 lumens (CREE)
i
Powered by 130mAh Li-polymer rechargeable battery
i
Built-in Micro USB charging port with indicator
i
Quick charge in 45 minutes
i
Low battery indicator
i
Temperature controller to protect the core components and the user
i
Clip slots designed into body and a two-way clip included
i
IP65 weather resistance
Dimensions
Length: 53.9mm
Diameter: 14.5mm
Weight: 11.8g
Accessories: Lanyard, Bead Chain, Stainless Steel Clip, USB Cable,
Neoprene Toolhead Adapter Bushing and User Manual.
Battery specifications
Polymer Li-ion
battery
Dimensions
Standard
voltage
Capacity
Rechargeable
501030
4.2 V
130 mAh
Product Parameters
LED: CREE: XP-G3 S5 6500K
Mode
Specification
Ultra-
Low
Low
†
Med
High
Strobe
2 Lm
22 Lm
230 Lm 550 Lm 550 Lm
7-8
Hours
150
Minutes
55
Minutes
38
Minutes
/
980 cd
80m
1.5m
IP65 water resistance
Notes:
† The Low brightness mode is recommended for reloading.
Times are based on maintaining the rated light output. Usabel light levels can
be expected for longer times depending on setting.
Note: The above-mentioned parameters are approximate and may
vary between flashlight and environments.
User Manual
User Interface
Operation/LED
Function
Momentary ON
Press and hold
Constant On
Double click
Cycle through (Click)
Low-Med-High-Strobe
Turn off
Long press for 0.5s
Single Click after using at any mode over 60s
*
Note:
1. The output will step down to 65 lumens in 2 minutes working on High
mode due to the heat the high mode produces, and the output will be
adjusted real time by the temperature controller.
2. 3 clicks from off to access the hidden Ultra-Low mode.
Product Illustration
Front
Back
Back
V2
vv
On / Off Switch
Polyamide Body
Stainless Steel Bezel for LED
Front View
Back View
Grooves
Micro USB Port
Lanyard Hole
Pocket Clip
