OPERATING MANUAL FOR
CUBE II
9
5.4
|
Placing of goods in the display case
Showcase is not designed for cooling goods, but to maintain the temperature of pre-chilled goods during its presentation
in the display case. Goods whose temperature is higher than the temperature inside the display case, may not be placed
in the unit.
Place the goods on the shelves, so that:
- between pieces is a
gap of at least 1 cm
- goods do
not exceed the edges of shelves
-
total weight
of the goods on one shelf
does not exceed
the
carrying capacity
per shelf (10 kg)
Improper storage
of goods slows the circulation of air inside the
display case and
raises its temperature.
The front vents and rear exhaust vents must not be covered by goods or other items!
Also, the space between the shelves and the rear sliding door must remain free - goods shall not exceed the edges of the
shelves!
When loading and unloading goods, open and close the door as quickly as possible to shorten the length of time that the
door is open, to prevent leakage of cool air.
5.5
|
Turn off
1) Turn off the light (
1
).
2) Turn off the main switch (
3
).
3) Disconnect the showcase from power supply. Green control (
2
) will not light.
4) Remove all the goods and clean the showcase, see 6.1 Daily maintenance.
5) To prevent mold and unwanted odors, leave the door open to dry up the exhibition space completely.
