OPERATING MANUAL FOR
CUBE II
10
6
|
MAINTENANCE
Showcase does not require any special maintenance. However, it must be kept clean and remove the residues of
exhibited goods and other contaminants.
Instructions for maintenance is obligatory to follow, otherwise void the warranty. Just regular maintenance windows and
following all instructions is to ensure its long life and trouble-free function.
Before starting any maintenance or service work the showcase must be disconnected from the electricity supply by pulling
the power plug from the socket, otherwise there is a danger of electric voltage!
Before starting any maintenance or service work the responsible person must be thoroughly familiar with all instructions,
prohibitions and recommendations contained in chapter 4.
Damage caused by improper cleaning and maintenance is not covered by warranty.
Elements that were set by the manufacturer or authorized service agent must not be adjusted by the user.
Plan of maintenance:
INTERVAL
PART
ACTION
DETAILS
Daily
Exhibition space, shelves and glass
Cleaning
6.1
Monthly
Condenser
Cleaning
6.2
Quarterly
Basin and evap bottom space
Cleaning
6.3
Regularly
The power supply cable
Control
6.4
Doors gasket
Cleaning
6.1.
|
Daily maintenance
Daily clearing of exhibition space
from the remnants of the exhibited goods includes:
• Sweeping or vacuuming of the crumbs.
• Washing with damp cloth or towel.
When cleaning, do not use aggressive cleaning agents or sharp objects.
Never use water stream when cleaning, there is a risk of electrical short circuits and electric shock.
• If it is necessary to polish the front glass and rear doors by ordinary detergent, leave the door open to exhibition space
until the showcase dries up completely. To prevent mold and unwanted odors.
6.2.
|
Monthly maintenance
Dirt can impede the exchange of heat between the condenser and the environment, which causes an increase in
electricity consumption and shortens the life of the compressor. Thus,
each month clean the condenser
:
• Unscrew and remove the cover grille.
• Use a soft brush or brush to clean the condenser lamellas. If the condenser is
extremely dirty (fins are clogged with dust and other impurities), use a vacuum
cleaner, compressed air or compressed nitrogen (performed by professional
service company) to blow the dirt through the lamellas.
Never use wire brushes and other sharp objects that could damage the condenser lamellas.
