Fantastic Prize GMP(Skill) Manual
08/09/2022
18
If you see following error signs showing on the display, please try the recommended action.
Display
Possible Cause
Recommended action
2 Door is Open
The prize door is not been
closed.
Close the prize door
The prize door lock is faulty.
Replace the prize door lock.
5 Y reset err
The crane do not touch the
Back limited sensor.
Restart the machine.
Connector became loose
during transport.
Check and reconnect the Back limited
sensor and Front&back motor
connector.
Back limited sensor is faulty.
Replace Back limited sensor.
Front and back motor is faulty.
Replace Front and back motor motor.
6 Z reset err
The scissors are not cut or
continuously cutting during the
game.
Restart the machine.
Connector became loose
during transport.
Check and reconnect the sensor and
motor connector.
Scissors sensor screw loosen
Adjust the scissors sensor screw.
Scissors sensor is faulty.
Replace scissors sensor.
Scissors motor is faulty.
Test the scissors motor.(Refer to 8.4).
If the motor is faulty, replace scissors
motor.
15 coin err
The coin mechanism signal is
faulty.
Turn the NO/NC switch to the NO
position.
The coin mechanism is faulty.
Replace coin mechanism.
7 No present
No prize on the cabinet.
Add prize.
The prize is too light
The prize weight should be over 0.5kg.
Hook sensor is faulty.
Replace Hook sensor.
24 Wait
Rs485 Link
Mainboard 485 connector
became loose during transport.
please check whether 484
communication is loose.
