OPERATING MANUAL FOR
KENTUCKY COLD
9
The front exhaust and side vents must not be covered by goods or other items!
Also, the space between the containers, shelves and the rear sliding door must remain free - goods shall not exceed the edges
of the shelves nor containers!
When loading and unloading goods, open and close the door as quickly as possible to shorten the length of time that the
door is open, to prevent leakage of heated air (ie cooling the interior of unit).
5.5
Turn off
1) Turn off the light (
2
).
2) Turn off the main switch (
3
).
3) Disconnect the showcase from power supply.
4) Remove all the goods and after the unit is cooled, clean the showcase, see 6.1 Daily maintenance.
5) To prevent mold and unwanted odors, leave the door open to dry up the exhibition space completely.
Always be aware of touching heated internal parts of the showcase without proper tools, ie hands protection.
6
MAINTENANCE
Showcase does not require any special maintenance. However, it must be kept clean and remove the residues of exhibited
goods and other contaminants.
Instructions for maintenance are obligatory to follow, otherwise void the warranty. Just regular maintenance windows and
following all instructions is to ensure its long life and trouble-free function.
Before starting any maintenance or service work the showcase must be disconnected from the electricity supply by pulling
the power plug from the socket, otherwise there is a danger of electric voltage!
Before starting any maintenance or service work the responsible person must be thoroughly familiar with all instructions,
prohibitions and recommendations contained in chapter 4.
Damage caused by improper cleaning and maintenance is not covered by warranty.
Elements that were set by the manufacturer or authorized service agent must not be adjusted by the user.
Plan of maintenance:
INTERVAL
PART
ACTION
DETAILS
Daily
Exhibition space, shelves, containers and glass
Cleaning
6.1
Weekly
Inner space, outer filter of condenser
Cleaning
6.2
Regularly
The power supply cable
Control
6.3
Space around and under unit
Cleaning
