UNISENSE MultiChannel UniAmp, User Manual

10

s

pecifications

for

 u

ni

M

otor

 c

ontroller

 Mc-1, Mc-2, 

or

 Mc-3

•  AC power supply adaptor: In: 100-240 VAC, 60-50 Hz, 1 ⸀4 A  Out: 

24VDC, 5A, 120 W max

•  Interface: USB

• 

Con昀椀gured for: UniMotor Stage 15 cm (MS-15)

•  Operating temperature: 0-70°C (32 to 158°F)

•  <90% RH non-condencing

s

pecifications

for

 u

ni

M

otor

 s

tage

 15 

cM

 Ms-15 (

with

 Mc-1, Mc-2, 

or

 Mc-3)

•  Movement in longitudinal  axis: 150 mm

•  Resolution of motorized micromanipulator stage: 0 ⸀5 µm

•  Accuracy: 0 ⸀2%

•  Maximum linear speed: 10 mm/sec

•  Minimum linear speed: 1 µm/sec

•  Maximum axial load: 5 kg (11 lbs)

•  Motor type: Stepper motor

M

otor

control

button

 - f

unctions

The Control Button on the motor housing (see picture right) has several 
functions:

•  Rotate up or down to move the Stage Plate up or down ⸀ The motor 

speed increases with time, so short press for slow and precise 
movement, long press for fast and long movement ⸀ 

•   Pushing the wheel in has two functions:

o Emergency stop if the motor is running ⸀

o Making the light on the Motor Controller blink for the channel this 
motor is connected to ⸀ This is useful to identify the X, Y, and Z axes in 
2D and a 3D setup ⸀ 

Micromanipulator mounted on 
a Motor Stage