output
November 19, 2019
13:11
Page 3
SulfiLogger_Manual_EN_203.pdf
OVERVIEW
The SulfiLogger™ sensor is available in a number of different configurations. Some of these are available in
ATEX certified versions. Pay close attention to your product type during the reading of this manual and the
installation of the sensor. ATEX certified versions of the sensor are labeled SulfiLogger™ X1 and standard
versions of the sensor are labeled SulfiLogger™ S1. If your product is an ATEX certified product (X1 series
sensors) it is very important that you carefully follow the instructions related to ATEX specific installation
requirements. Guidance for installation of the SulfiLogger™ sensor can be found in Appendix A. This guide
is relevant for sensors with serial numbers starting from S/N: 1004000. For older sensors please find the
relevant guide on the SulfiLogger™ website at www.sulfilogger.com or contact Unisense.
3
