Digital Network Video Surveillance System
Parameter
Function
System
Time
Here is for you to modify system time. Please click Save button after
your completed modification
Sync PC
You can click this button to save the system time as your PC current
time.
Data
Format
Here you can select data format from the dropdown list.
Data
Separator
Please select separator such as – or /.
Time
Format
There are two options: 24-H and 12-H.
DST
Here you can set day night save time begin time and end time. See
Figure 7-24 and Figure 7-25.
Language
You can select the language from the dropdown list. Device needs to
reboot to get the modification activated.
SD card
Full
There are two options: stop recording or overwrite the previous files
when card is full.
When current working card is overwriting or it is full now, system
stops record.
If current working card is full now, system goes to overwrite the
previous file.
Pack
Duration
Here you can select file size. Default setup is 60 minutes.
Device No
When you are using one remote control (not included in the
accessory bag) to manage multiple devices, you can give a serial
numbers to the device.
Please note current series product
does not
support this function.
Video
Standard
There are two options: PAL/NTSC.
Please note, for the Web user, this information is for reference only.
You can not modify.
Encode
Please note encode setup has relationship with the hardware encode setup. You can set your self-
defined only if it is in mode 3.
Encode interface is shown as in
X454H454H454H424H424H424H431H394HFigure 7-81X
.
Unisight Digital Technologies, Inc.
105
