Digital Network Video Surveillance System
Frame rate
You can select from the dropdown list.
Resolution
You can select from the dropdown list.
Quality
You can select from the dropdown list. Here is for you to set
video quality.
Abnormality
The abnormality interface is shown as below. See Figure 7-50.
Figure 7-105
Please refer to the following sheet for detailed information.
Parameter Function
Event
Type
The abnormal events include: no disk, no space, disk error, net error.
You need to draw a circle to enable this function.
Normal
Out
The corresponding alarm activation output channel when alarm occurs,
There are 7 channels.
Latch
The alarm output can delay for the specified time after alarm stops. Then
system disables alarm and corresponding activation output.
Send
email
If you enable this function, system can send out email to alarm the
specified user. Please note this function is null when net error occurs.
Alarm
upload
System can upload the alarm signal to the network (includes the alarm
centre.)
Unisight Digital Technologies, Inc.
129
