Digital Network Video Surveillance System
Parameter Function
Capture
You need to input capture channel number so that system can backup
motion detection snapshot file.
Copy
It is a shortcut menu button. You can copy current channel setup to
one or more (all) channels.
Save
You can click save button after you complete setup for one channel, or
you can complete the whole setups and then click save button.
Refresh
Click this button to get device latest configuration information.
PTZ
PTZ interface is shown as in
X470H470H470H440H440H440H447H410HFigure 7-97X
Please note, before operation please make sure you have set speed dome address. And DVR and speed
dome connection is OK.
Figure 7-97
Please refer to the following sheet for detailed information.
Parameter Function
Channel
You can select monitor channel from the dropdown list. .
Protocol
Select the corresponding dome protocol.(such as PELCOD)
Address
Set corresponding dome address. Default value is 1. Please note your
setup here shall comply with your dome address; otherwise you can
not control the speed dome.
Baud
Rate
Select the dome baud rate. Default setup is 9600.
Unisight Digital Technologies, Inc.
123
