Digital Video Network Surveillance System
Unisight Digital Technologies, Inc.
50
Fig 5.18 Motion alarm handle setup
Step 6: Motion alarm record channel setup:
When there is motion alarm happened, you
can trigger related camera to start to record. In “Motion Alarm Handle” menu, you can select one
or more record channels. Please use
[
ENTER
]
or
[
EDIT
]
key to enable the flag into “
9
”.
Note: In order to make the cameras start recording, in “Recording” menu, you must enable
recording schedule and set “Rec Type” as “Motion Detection” or “Motion | Alarm”. Please refer to
chapter 5.12 for recording setup.
Step 7: Motion alarm schedule:
When the motion alarm is happened in schedule, DVR will
response such as “On Screen Warning”, “Audible Warning”, “Upload to Center” and “Trigger
Alarm Output”. You can setup 4 time periods for one day and 7 days for one week.
Note: Time periods in one day can not be repeated.
Step 8: Motion alarm handle method setup:
You can select one or more handle methods
such as “On Screen Warning”, “Audible Warning”, “Upload to Center” and “Trigger Alarm
Output”.
Description: If “On Screen Warning” is enabled, when there is motion alarm happened and
DVR is in preview mode, DVR will switch to the related camera. If you trigger more than one
