Digital Video Network Surveillance System
Unisight Digital Technologies, Inc.
56
command.
Note: The time periods in one day can not be repeat.
Step 4: Copy to other days
You can repeat step2 and step3 to setup for other days. Also you can copy the current day to
other days.
Step 5: Save
Press “Confirm” back to “Recording” menu. Press “Confirm” again to save the parameters
and return main menu.
Note:
1)
If record type is “Motion Detect” or other related types, you must setup “Motion
Detection” in order to trigger motion recording
(refer to chapter 5.10).
2)
If record type is “Alarm” or other related types, you must setup “Alarms” in order to
trigger alarm recording (refer to chapter 5.13).
3)
The time period is among 00:00—24:00.
5.13
External
Alarm
Input and Relay Output
For DS-7108 , there are 16 alarm in and 4 relay out. In “Alarms” menu, you can setup for
each external alarm input.
In main menu, move “Active Frame” to “Alarms” icon and press
[
ENTER
]
key to enter into
alarms menu: Shown as fig 5.22
