Digital Video Network Surveillance System
Unisight Digital Technologies, Inc.
62
or
[
ESC
]
key to abort.
5.14
Network
Parameters
If you want use network to access DVR, you must setup network parameters.
Note: If any network parameter is modified, you must save and reboot DVR to make it into
effective.
In main menu, move “Active Frame” to “Network” icon and press
[
ENTER
]
, you can enter
into “Network” menu as following: Shown as fig 5.27
Fig 5.27 network setup
“Network” menu description:
IP address:
This IP address must not be conflict with other IP. If there is DHCP server in
network, you can set the IP as “0.0.0.0”, save and reboot DVR. In reboot process, DVR will
search the DHCP server and get one dynamic IP address. This item will display the dynamic IP
address. If DVR uses PPPoE function, also DVR can dialup into internet and this item will display
the dynamic internet IP address.
Port:
Network access port number, must be greater than 2000.
