background image

Operation manual of solar water controller SR601 

-------------------------------------------------------------------------------------------------- 

 

~ 1 ~ 

Contents 

Contents------------------------------------------------------------------------------------1 

1.  Safety  information---------------------------------------------------------------------3 

1.1  Installation  and  commissioning--------------------------------------------------3 

1.2  Liability  waiver------------------------------------------------------------------------3 

1.3  Description  of  symbols-------------------------------------------------------------4 

2

Installation-----------------------------------------------------------------------------4 

2.1  Installing  the  controller-------------------------------------------------------------4 

2.2  Power  connection  -------------------------------------------------------------------5 

2.3  Terminal  connection  ---------------------------------------------------------------6 

2.4  Installing  electromagnetic  valve  ------------------------------------------------7 

2.4.1  Faults  checking  of  electromagnetic  valve----------------------------------8 

2.5 Installation of water level and temperature sensor---------------------------9 

2.5.1Installation  of  Silico-Sensor-----------------------------------------------------9 

2.5.2 Installation of underside positioned sensor--------------------------------10 

3. Introduction of solar system-------------------------------------------------------11 

4. Instruction of  display  illustration--------------------------------------------------12 

4.1 Screen  display  instruction--------------------------------------------------------12 

4.2 Code instruction---------------------------------------------------------------------12 

5.  Functions  and  Operation-----------------------------------------------------------13 

5.1“ON/OFF”  button--------------------------------------------------------------------13 

5.2  Water  loading  ----------------------------------------------------------------------13 

5.3 Water supply function  when lack of water-----------------------------------14 

5.4 Timing control water loading ----------------------------------------------------14 

Summary of Contents for SR601






















Reviews: