Using your telescope
Prerequisites
WARNING :
The screws in the legs of the tripod may loosen during transport or use.
Please verify that all the screws are in place. If they are not, tighten them with the tool
provided in the accessory kit.
Installing and adjusting the tripod
Open the legs of the tripod
and adjust its height. Always
use your tripod on a firm
surface.
Locate the bubble level at
the top of one of the three
multi-angle tripod locks
(top). Adjust the legs so that
the bubble level is inside the
black circle.
Verify that the legs of the
tripod are secure.
Unscrew the two
screws on the crown of
the tripod.
IMPORTANT: TO ENSURE THE PRECISION AND ACCURACY OF YOUR OBSERVATIONS,
ALIGN AND RE-CENTER THE BUBBLE EVERY TIME YOU MOVE YOUR TELESCOPE.
Tighten the tripod screws with the tools included in the box to prevent the telescope
from falling, as they can loosen over time.
!
2
U
ser
guide
|
12
E
nglish
