16
Six for pressure
Seven for sensor dew point
1.
Time, Time/Week and Date.
Press the
C or MIN/MAX/-
key to toggle
between time, time/week and date.
2.Indoor Temperature.
Press the
C or MIN/MAX/-
key to toggle between
temperature and dew point
3.
Rainfall.
Press the
C
or
MIN/MAX/-
key to toggle between rate, 24h,
week, month and total.
To clear the total rain, press the
C
or
MIN/MAX/-
button until total rain is
displayed. The total rain will flash. Press and hold the
SET
button for five seconds until
total rain reads 0.0.
4.Outdoor Dew Point.
Press the
C
or
MIN/MAX/-
key to toggle between AT
（
Apparent Temperature) and dew point.
5.Wind Average.
Press the
C
or
MIN/MAX/-
key to toggle between
current,2mins and 10 minutes.
6.
Absolute Pressure and Relative Pressure.
Press the
C
or
MIN/MAX/-
key
to toggle between absolute pressure and relative pressure.
7.Sensor Heat Index.
Press the
C
or
MIN/MAX/-
key to toggle between
sensor heat index and dew point..
7.2 Set (Program) Mode
While in Normal Mode, press
and hold
the
SET(MODE)
key for at least three seconds to
enter the Set Mode. The first setting will begin flashing. You can press the
SET(MODE)
key again to skip any step, as defined below.
Note:
In the Set mode, press the [+] key or [
-
] key to change or scroll the value. Hold
the [+] key or [
-
] key for three seconds to increase/decrease rapidly.
Note:
To exit the Set mode at any time, press the
SNOOZE
button of the display
console.
1.
Time SYNC(default: ON).
Press the SET key again to set the network time sync.
Press the [+] key or [-] key to switch between SYNC time ON and SYNC time OFF of
measure.
2.
12/24 Hour Format (default: 24h):
.Press the
SET(MODE)
key again to adjust the
12/24 hour format setting (FMT). Press the [+] key or [
-
] key to change between 12
hour and 24 hour format.
3.
Change Hour.
press the
SET(MODE)
key again to set the hour. Press the [+] key or
[-
]
key to adjust the hour up or down. Note the PM icon is present during afternoon hours.
4.
Change Minute.
Press the
SET(MODE)
key again to set the minute. Press the [+] key
or [
-
] key to adjust the minute up or down.
5.
Date Format (default: MM-DD): Press
the
SET(MODE)
key again to enter the
day/month format mode. Press the [+] key to switch between MM-DD-YY, DD-MM-
YY.
6.
Change Month.
Press the
SET(MODE)
key again to set the calendar month. Press the
[+] key or [
-
] key to adjust the calendar month.
7.
Change Day.
Press the
SET(MODE)
key again to set the calendar day. Press the [+]
key or [
-
] key to adjust the calendar day.
8.
Change Year. Press
the
SET(MODE)
key again to set the calendar year. Press the [+]
key or [
-
] key to adjust the calendar year.
9.
Max/Min Clearing (default: ON)
. Press the
SET(MODE)
key again to set the
max/min clearing mode (CLR). The Max/Min can be programmed to clear daily (at
