21
25.
Indoor humidity high alarm
26.
Indoor humidity low alarm
27.
Indoor dew point high alarm
28.
Indoor dew point low alarm
29.
UV Index high alarm
30.
Sunlight high alarm
31.
Sensor(CH1) Temperature high alarm
32.
Sensor(CH1) Temperature low alarm
33.
Sensor(CH1) Humidity high alarm
34.
Sensor(CH1) Humidity low alarm
35.
Sensor(CH1) Heat Index high alarm
36.
Sensor(CH1) Heat Index low alarm
37.
Sensor(CH1) Dew Point high alarm
38.
Sensor(CH1) Dew Point low alarm
Note:
To prevent repetitive temperature alarming, there is a 0.5 °C tolerance band. For
example, if you set the high alarm to 26.7 °C and silence the alarm, the alarm icon will
continue to flash until the temperature falls below 26.2°C, at which point, the alarm will
reset and must increase above 26.7 °C to activate again.
Note:
To prevent repetitive alarming of humidity, there is a 4% tolerance band in
humidity alarm. For example, if you set the high alarm to 60% and silence the alarm, the
alarm icon will continue to flash until the humidity falls below 56%, at which point, the
alarm will reset and must increase above 60% to activate again.
8.4
Alarm
and
Command
Key
Beeper
ON/OFF
Mode
The beeper can be silenced for both alarms and key strokes.
In normal mode, press and hold the
ALARM
key for three seconds to toggle the beeper on
or off (depending on the current setting).
The
BZON
(beeper on) or
BZOFF
(beeper off) icon will appear in the time area for three
seconds. press and hold the
ALARM
key again for three seconds to toggle the
BZON
or
BZOFF
command.
9.WiFi Connection Status
When the console successfully connects to your Wi-Fi router, the Wi-Fi signal icon
will appear on the LCD display(behind the Outdoor humidity). If the Wi-Fi signal is not
stable or the console is trying to connect to the router, the icon will flash. If the icon
disappears, it means the console is not connected to the Wi-Fi router.
Note: If you own a dual band router (2.4 GHz and 5.0 GHz),make sure you
connect to the 2.4 GHz band, otherwise it will fail to connect the weather station to
WiFi.
10. Time Server Sync Status
After the console has connected to the internet, it will attempt to connect to the internet
time server to obtain the time. Once the connection succeeds and the console’s time has