STEP 2.
Switch on the scales by slight tap on the platform. Then wait a few
seconds, the following will appear:
(
Note
: the display will show
‘Err’
if you step on the scales before it shows
‘0.0
0
’
. If this
happens please start from the beginning of Step 2).
STEP 3.
Gently step on the scales. Put your feet evenly on the scales without moving and
wait while the scales compute your weight. Your correct weight will be displayed then in
the following:
AUTOMATIC SWITCH OFF
When you step off the scales, it will automatically switch off. (If no weighing is carried out
while zero is being displayed, the scales switch itself off automatically after approximate
6 seconds.)
OVERLOAD INDICATOR
When the scales are overloaded (over 150 kg), the following will appear on the screen:
ENGLISH
4
UBS-2090E Inst 12/4/08 6:26 PM Page 4
